Continuous Jelq / erection level / reps . Advice needed

**ironsteel** · 10-30-2009

Hi bros,
I need an opinion on that issue:
I'm doing the Jp beginner routine and my jelq session lenght is about 25-30min respecting the number of strokes and the 3-4 seconds per rep.
Said this , the issue (or doubt) is on the erection level for the jelq: If the correct jelq technique provides a non stop jelqing I start the first stroke with 80% for example and at the 100 I'm at 30%.
Because I see a better and more powerful expansion with a 70-80% Erection level can I stop after 25 strokes, regain the level, another 25, regain the level , another 25...up to 100? and after switch to v-jelq.. and continue with the scheduled program..
Is the whole session effective as a non-stop one?
Anything wrong with this method?

**PhibbysHammer** · 10-30-2009

I'd say it would be just as effective, howver I'll also say you really shouldn't jelq at 80% actually 70% is recommended max.
Since everything is already expanded at 80%, there is no room for much more stretch and you could do some damage.

**rbi99** · 10-30-2009

Couple of things. As you start to loose your jelqing erection level, a few strong kegels should get it back and running. Kegel, grip, release and kegel again, grip and jelq. Are you doing any v-jelqs? I would suggest maybe doing 50 jelqs, then 30 v-jelqs. Maybe try three sets of these. That is a pretty basic routine, but it will probably keep your erection state pretty stable, while actually adding some additional reps.

**ironsteel** · 10-30-2009

thanks for the help guys, it is very appreciated.
Ok max 70%.. but is not a steady level because with the reps going up erection level fall down so you are jelqing between 70% and 50% and it is fine I think.

Rbi: I'm already following the JP routine so I'm doing 50 jelqs + 30v jelqs x 3.
With v-jelqs my erection level is more stable at about 50%.

**kingpole** · 10-30-2009

Originally Posted by ironsteel

Hi bros,
I need an opinion on that issue:
I'm doing the Jp beginner routine and my jelq session lenght is about 25-30min respecting the number of strokes and the 3-4 seconds per rep.
Said this , the issue (or doubt) is on the erection level for the jelq: If the correct jelq technique provides a non stop jelqing I start the first stroke with 80% for example and at the 100 I'm at 30%.
Because I see a better and more powerful expansion with a 70-80% Erection level can I stop after 25 strokes, regain the level, another 25, regain the level , another 25...up to 100? and after switch to v-jelq.. and continue with the scheduled program..
Is the whole session effective as a non-stop one?
Anything wrong with this method?

It may evan be better. Because everytime you lose EL you have to pump fresh 02 to regain the erection level.