Quick Extender Pro Optimization and FAQ

[j5walter]

Hey thanks pedanny! Do you ever use the screws to extend the length, or do you just add another piece?

I'm pretty sure the screws are just there to secure the device and you aren't supposed to use them to change the length (otherwise your QEP could get too long and you risk damaging your penis). You only have to add the extension rods to make it longer, but make sure you follow the proper schedule and don't add too many rods too quickly.

Hi foranon25,
YOUR ADJUSTED STARTING MEASUREMENT:
Whatever your regular erect length is, you subtract 1.6 from it. So mine was 4.5 erect, so Adjusted Start size is 2.9. Well the device itself is 3.6 inches, so I just started with NO rods. Otherwise you start with measuring out how many 0.2 inch rods will make it to your Adjusted Start size.

STARTING OUT/ACCLIMATION PERIOD:
You start out doing up to 3 hrs a day until you hit 15 hrs, then you add 0.2 inch rod. Then you do up to 6hrs a day until you reach the next 30 hours. Add another 0.2 inch rod. Now you do 40 hrs at max of 8 hrs per day. Add 0.2 inch rod. Acclimation period over, do up to 8 hrs a day and add new 0.2 inch rods every completed 56 hrs.
I spreadsheet this to keep my sanity.
Attachment 104167
I can upload the video later if you still need it.

Thanks
Pedanny

Would you mind uploading the video? I think there are many of us who don't have a DVD player and so couldn't watch it, so you would really be helping us out.

Thanks.

[foranon25]

Well why are they adjustable/allow you to make your device longer if you're not supposed to use them as such?

[j5walter]

Well why are they adjustable/allow you to make your device longer if you're not supposed to use them as such?

I haven't seen the video so I'm not certain, but I think those long screws are just there so that even if you add a bunch of extension rods all of them will still be secure. I think it'll stop being as adjustable after you add more extension rods.

[Mistaree]

Hi first time poster here...just wondering what you mean by adjusting screws to compress the springs?

How would one adjust the screws?

Cheers

[pedanny]

I'm pretty sure the screws are just there to secure the device and you aren't supposed to use them to change the length (otherwise your QEP could get too long and you risk damaging your penis). You only have to add the extension rods to make it longer, but make sure you follow the proper schedule and don't add too many rods too quickly.



Would you mind uploading the video? I think there are many of us who don't have a DVD player and so couldn't watch it, so you would really be helping us out.

Thanks.

Sure, I uploaded here. Only those of us with the link can view. Hope it helps.

Quick Extender Pro Getting Started DVD:

https://vimeo.com/497045303/5cfa311646


Thanks
pedanny

[Ultimate Burrito]

I'm pretty sure the screws are just there so that you can lock the device at a certain angel if desired. The only critical factor when using this device is to keep the springs compressed while wearing the device. That's the only way you will have the specified amount of tension applied. If the springs aren't compressed and the burrito isn't pulled tight you are essentially wearing an expensive ADS. Don't adjust the screws for tension. If you are having to do that then just add another small rod. Also be sure to inspect the device routinely to make sure all internal screws and rods are seated properly in the device. Otherwise you may have something come apart and it won't be pretty. I nearly lost my device one day in a department store through my pants leg because one of the screw rods came loose and the noose slipped lol.

[pedanny]

I'm not sure how to search this particular thread, so in case it hasn't been asked.

Has anyone found their Quick Extender Pro slipping constantly?

I keep pulling it tight and it just loosens itself a lot. I'm wondering if either the unit or the noose have got something slippery on them (like lube for example) and if there's a way to get it off or make it tacky and work properly again.

Anyone experience this? Super annoying. It's not my first day, either, I have over 520+ hours of use with QEP. Just never slipped like this before.

Thanks
pedanny

[Jon329]

Great idea, I didn’t think of something as what I now think to be obvious. Ha well I would use the back holes to fasten in behind the gland and push the excess tubes back up through the front holes to prevent it from coming loose. It’s worked for me so far but I wasn’t able to fasten in this way when I would jelq up my glad fully before tightening in, I’d be touching the end of the tubes.

Thanks for sharing I will definitely be adjusting my device so I can strap in this way and now stretch with my glad full.

I don’t use gauze or anything just use the device bare I found at first some discomfort only when tightening down and loosing out the friction can be irritable how ever the few seconds pass and it’s comfortable for me so I’ve found using nothing is faster to get in and out and the friction helps keep me from slipping best.

[Jon329]

I’d use dawn dish soap it gets rid of grease well and it’s not to strong of cleaner i haven’t had any damage to mine yet.

[Jon329]

Wow reading your thread I can see the first time I order the QEP I really put myself at risk maybe for all those like me who ordered the replacement device and extra rods and didn’t get the DVD we should put the info about setting the device as to which length.

The mistake I made was I added enough bars the device was half an inch past my bpel. I would put on the device erect and compress the springs fully so that the straps holes lined up below the gland and I would stretch like that.

I ordered one of the bigger packages this time and of course watched the DVD and was in shock how poorly I wore it. I did search on here and on their website and didn’t find any information at the time.

Your post is great I wish I seen it from day one now I did have gains. After seeing your thread and the DVD I still feel like sticking to my ways however I’m definitely going to do as the DVD says and work my way to the 8 hours.


the only thing is when I did use the device this way the springs never were really compressed so I’m still confused to how I’ll have tension if I sent the device 1.5 inches less the my length ( question is it your flacid length then you subtract the amount from)???

The screws I would also use as I loosened up to increase tension as time went on during a session. I’m seeing you don’t recommend that either but say they’re just to tighten and hold the angle in place.

Seems I need to watch the video again and re set up my device I have a full routine I plan to jump into and I want to see max results so I’m glad I seen this post because I wasn’t going to listen to the video as I had gains of up to an inch bpel and almost to flacid.

Maybe we can have a sticky thread for extenders that just explains the length to set your device up in comparison to your size and state if you should use it in only a flacid state. Those two seriously went over my head and I think it could happen for others to also leave in the increase in length after each time marker.


I know with the cost of this device there must be many others going the cheap way as I did and with the videos there’s loads of room for confusion. Even if your thread could be sticky I can’t seem to find threads only for traction devices. Maybe a direct root could help with great loggin and information as you have.