REP Support for PEXtender

[EddyEddy]

I bought one recently so surprised to hear it's been withdrawn. I tested it in the recommended configuration, but without much success.

The one-size-fits-all cap for the glans seemed tiny, and I hurt myself a few times trying to get it on. The velcro strap needed to be below my knee to get enough stretch, and it required frequent adjustment depending on my position. I found there wasn't enough available adjustment, and wearing long trousers at this time of year made it pretty impractical. I couldn't find a way to have the straps on my upper body.

Being an inventive sort of chap, I laid all the parts out and thought about what we were trying to achieve here. After some trial and error, here's what I came up with:

A braided, elasticated belt I had, with infinite adjustment, i.e. no holes.

A shoulder pad thing to pass the belt through, for comfort. I borrowed it from a luggage strap I have.

Two detachable zip ties, about 5mm wide, from my workshop.

And from the Pextender: a bell and a sleeve.

Method:

Sling the belt over one shoulder and under the opposite arm, loosely join.

Hold the rolled-up sleeve open widely using 4 or more fingers of both hands, position it near the base of the penis.

Lube the inside of the bell and place over the glans. In my case I leave the foreskin in place over the glans.

Unroll the sleeve, if you're lucky you'll have about 10mm that overlaps the bell. If not, reposition the sleeve. Try and avoid skin getting dragged between the sleeve and the edge of the bell. That nips! Secure sleeve in place using one of the zipties around the overlap. That'll stop any chance of the sleeve pulling off the bell.

Loop the other ziptie through the metal loop on the bell, and around the belt.

That's it - adjust as required and feel the pull. By leaving your shirt untucked at the front, you have instant access to the belt buckle for adjustments depending on whether you're sitting, lying, standing and how much stretch you want. If you wear a loose top you can wear it around people no problem.

Also easy access for peeing:

Loosen the ziptie around the bell, roll back the sleeve enough to remove bell. Pee (careful - your aim may be affected by the sleeve!) And replace.

I'm on my fourth day using this set-up. It's proven to be really comfortable, slip-free, convenient and effective. By effective I mean I do feel a good stretch, no length gains from it yet, too early. But after each session my limp penis looks amazingly long!

I find the pulling sensation quite pleasant, so I look forward to wearing it. Up to 6 hours a day so far with no NPI, just a little puffiness to the foreskin (as with pumping). That disappears quite quickly afterwards.

By flexing your shoulders or making yourself more upright, you can give yourself tugs in addition to the steady pull. And also you have built-in rest periods when you bend over etc. And reaching for a high shelf gives you a turbo pull, lol.

I feel I kind of wasted my money on the Pextender, however the sleeve and the bell are the critical parts and I'm using those. Hard to imagine how you'd be able to use home-sourced parts there. Bike inner tube + end part of a plastic cylindrical container of some kind?

Hope this info is useful to others who bought the kit and found it less than optimal.

Current: 7.4 x 5.7

[Khristu]

As per: https://www.pegym.com/forums/penis-d...ml#post1521027 there's no pumping attachment for this product via the site.

The site for PEXtender have been discontinued. Please feel free to forward your email(s) to me.

What is your email? I need a new sleeve and bell

[Big Al]

What is your email? I need a new sleeve and bell

Please send here.

[dellboy28]

At what position do you get the best stretch, I have been wearing mine for a few weeks now always wore it at 9oclock with belt around my waist however I occasionally use to feel the tug for which I counted to the nearest hour and removed. I am still a beginner with my extender device, I've realised placing my penis head inside the cup feels a lot better than wearing the cap however what would you guys recommend?

Ive stopped placing at 9oclock position and recently placed the strap just below my knee and hook on. I do feel the tug but its a lot different compared to when I use to place strap around waist. I only wear mine during night going into bed. I get a good 8 hours maximum some days minimum 6 hours.

[Big Al]

At what position do you get the best stretch, I have been wearing mine for a few weeks now always wore it at 9oclock with belt around my waist however I occasionally use to feel the tug for which I counted to the nearest hour and removed. I am still a beginner with my extender device, I've realised placing my penis head inside the cup feels a lot better than wearing the cap however what would you guys recommend?

Ive stopped placing at 9oclock position and recently placed the strap just below my knee and hook on. I do feel the tug but its a lot different compared to when I use to place strap around waist. I only wear mine during night going into bed. I get a good 8 hours maximum some days minimum 6 hours.

IMO you should attempt to attach the device on your thigh instead of around the waist- as a downwards stretch would but more stress on the suspensory ligament.

[dellboy28]

IMO you should attempt to attach the device on your thigh instead of around the waist- as a downwards stretch would but more stress on the suspensory ligament.

Right so I believe how I originally done is fine?

The waist band sit directly under my stomach just on top of my groins around my hips? Is that correct in doing so

so I should continue just placing towards right hand side at the 9oclock angle (obviously sits at 9.50-55 angle) some people recommended changing positions down, left and right? What you guys reckon? I’m happy sticking to one position

[Big Al]

Put the strap low enough in your leg so you can make adjustments as the session progresses.

Alternate sides for even development.

[Big Al]

A heads up: We're almost out of all replacement parts for PEXtender.

[batm0bile]

A heads up: We're almost out of all replacement parts for PEXtender.

Any updates on alternative pextender strategy ? Eagerly waiting

[Big Al]

Any updates on alternative pextender strategy ? Eagerly waiting

The Phalloextender should be coming back into promotion (along with on site support here) very soon.