Results 1 to 6 of 6
Thread: Question about pumping
- 04-28-2020 #1
When I pump, since I am 5" and pump till I reach the 6" , some of my skin below the base gets sucked in. Is it normal? What should I do about it? Its like very little maybe half inch. I use normal pump with rubber cap and no pressure gauge. i usually try to pull the skin out but few times with success.
Also yesterday after 2 days rest it was strange i could not pump to 6" at first try, but on second and third rep I did.
Thanks for reading and hoping for some answers
Cheers
- 04-28-2020 #2
- Join Date
- Feb 2020
- Posts
- 100
You should order a pump with pressure gauge so you can track your progress. Overpumping can injure your penis or In worst case scenario may destroy your unit. I teach that you should not go over 5hg. Also you should have the right size chamber. I know it can be expensive, but it's also one of the most important part of our bodys.
I newly bought a starter kit from tickwall and added some lube and a cylinder sleeve. I really love this product so fare. You also get a water trap. You can get the correct size for you and you won't have the same problem.
I see people talk about LeLuv and Lapump also. They also look like good quality products.
My routine:
I warm up with a hot shower and 5-10 min jelqing+erect ULI's follow up with 5 min warm up pumping 2-4 hg and 10 min 4 hg. I will increase 1 min every week with the pump to I reach 20 minuttes. I have prior PE experience with jelqing/squeezing. I do 2 days on 1 days off. If I can't get 90-100 % erection I take 1 extra day off.
Also I will experiment with some pulsepumping after a while.BPEL: 5,9 EG: 4,8
BPFL: 3,6 FG: 3,75
13.03.2020
Long term Goal
NBPEL: 8 inch EG: 6 inch
- 04-28-2020 #3
I highly agree with Icebear, get a gauge and go by that rather than pumping to a certain length. I've injured myself by doing that many times in the past you can check my log to see how many months I had to take off and let it heal. As far as pumping pulling below your base a bit, it's pretty common many guys get extra turkey neck as a result of pumping. It seems to accentuate it even further if you already have it (like me), but I don't really mind. The best thing you can do to prevent this from happening is get a smaller diameter pump that you can barely fit in, that way you don't have a ridiculous amount of space to expand in. It may be a bit counterintuitive if you're pumping for girth, but if you pack your pump you can expect some great length gains.
- 04-28-2020 #4
☼ Wizard ☼
White Tiger Award 2015
- Join Date
- Mar 2010
- Location
- North Texas
- Posts
- 38,924
- Blog Entries
- 10
cylinder - that which holds your 'meat'
pump - that which removes air from the cylinder
gauge - indicates the vacuum level inside the cylinder, usually in inches of mercury, "Hg
seal or ring - device, maybe latex/silicon/rubber, that fastens to the opening of the cylinder. It can help seal against vacuum loss, prevent scrotum or testicle(s) from being sucked into the cylinders opening.
Have fun, pump safely.
here is a cylinder where the user has it mounted into a seal/ring
sealcyl.jpgLast edited by Dangler; 04-28-2020 at 08:52 AM.
Valued Member of 10 years at the PEGym
Looks are deceiving, mirrors don't lie.
- 04-28-2020 #5
Thank you all for the responses. I been using the pump for a month now and have no problems. I dont really believe pumps by themselves to make a difference which is why i didn't want to invest in highly advanced pump. Got it for 15$ on aliexpress and had pretty good reviews. My routine id 2 days jelqs from JP90 , and 1 day 20mins pumping (4x5min) and finish with 100 jelqs. As far as pumping goes, i pump untl i feel a slight stretch and i feel co which is why i never go beyond that (followed tutorials online) . I believe its less than 5hg. But now as I got some experience i will look for a better pump bt until then i will keep using this one. Btw as for the skin, it is not the balls area skin but the harder pubic skin just around the base. Thanks again guys!! Much appreciated.
- 05-01-2020 #6
Member of the Month May 2020
- Join Date
- Mar 2017
- Location
- California
- Posts
- 322
On February 26, 1852, John...
This Day in History