Blisterfree Vac Hanging

[Marlon LGHanger]

Hi Marlon

To your information I actually started on 5LB and started from 20 min and made my way up to 7.5 over a month and half and it was not an error of operation I actually had a very good routine adding 5 min only a day from 20 min working my way up to an hour on any weight I did only when I was hanging for an hour comfortable without problem then I added weight and cut the time in half again .

I have noticed you always have criticism towards clients who use your product and are not happy I also emailed you multiple times and your replies didn’t help. and your customer service is not where it should be for a chamber that is 350$ I am very dissapointed and regret I bought this as it just sitting on my drawer now

U actually wrote me in an email if I need hanging lesson to get in touch with doctor .... and quite honestly you need for your price tag just have videos with informative instructions on how to use the device cause people complain on blisters all the time . And when I say almost meaning that after 25 min in that particular weight I felt my glans having too much pressure or tingly and I removed it immediately and I saw a big blister forming but I removed it right on time . And I was following a good routine and doing everything by the book . So again criticizing YOUR OWN clients instead of sending them to unclear blog on how to avoid blisters why don’t you go and shoot some clear professional instructional videos and teach us how you do it and how to properly use your product cause as I said it is not clear!!!!

Please describe what is unclear on any of our tutorial videos. All of our videos are made by our customers, one of which is Mike @ TotalMan. IMO he's made some very professional videos with clear explanations.

Sounds like from what you've described you had success for a limited amount of time, but now you're having issues. I recognize that you're frustrated and I'd honestly like to help you resolve the blister issue. I've said on many occasions the only negative side effect of vacuum hanging or of any vacuum based system is the potential for a blister. Guy's who've purchased the Phallosan or any of the Extender devices that utilize vacuum have occasionally experienced the same problem and found a way to work through it. Even guys who have used penis pumps have experienced blisters. It's inevitable, part of the learning curve, just like when you learned to ride a bicycle you probably fell and skinned your knee, but did you give up on learning to ride a bike?

So I personally would like to help you! I will set aside time to communicate with you personally, and see if we can't get you on the right track. It's a mission, but not a mission impossible. PM me with your cell number or if you're on WhatsApp we can communicate directly.

[Motor23]

Please describe what is unclear on any of our tutorial videos. All of our videos are made by our customers, one of which is Mike @ TotalMan. IMO he's made some very professional videos with clear explanations.

Sounds like from what you've described you had success for a limited amount of time, but now you're having issues. I recognize that you're frustrated and I'd honestly like to help you resolve the blister issue. I've said on many occasions the only negative side effect of vacuum hanging or of any vacuum based system is the potential for a blister. Guy's who've purchased the Phallosan or any of the Extender devices that utilize vacuum have occasionally experienced the same problem and found a way to work through it. Even guys who have used penis pumps have experienced blisters. It's inevitable, part of the learning curve, just like when you learned to ride a bicycle you probably fell and skinned your knee, but did you give up on learning to ride a bike?

So I personally would like to help you! I will set aside time to communicate with you personally, and see if we can't get you on the right track. It's a mission, but not a mission impossible. PM me with your cell number or if you're on WhatsApp we can communicate directly.

Thank you Marlon will send you a pm

[duude]

Hey Alex, this is an ingenious setup you have deviced! I tried it myself yesterday and I have a few quick questions if you don´t mind helping me with them.

1. The tip of the condom of the vac device, "deattaches" itself from the glans once I start hanging. This causes pressure on the tip of the glans and it is painful. How do you prevent this? If my explanation is not clear, I can send you a picture.
2. Do you attach the compression hanger ONLY on the wrapped up sleeve or also a bit on the "unsleeved" part of the shaft? In order to prevent the compression hanger from just pushing the vac hanger off the penis?

Thank you!

[deeze6]

I’m confused by your setup. It looks like the weight is attached to the compression hanger, not the vac hanger, correct?

It looks like you are using the vac hanger as padding for the compression hanger.
Why not just clamp over the sleeve of the vac hanger and not even attach the top?

[BigO]

WOW, I cannot wrap me brain around this but if it works for you and you are having success, well, there is more than one way to skin a cat.

I look forward to your progress with this set up.

I will follow this thread with interest....best of luck and hopefully you have great success.

This is what the forums are for, sharing ideas and helping each other out!

[Alex1988]

Hey Alex, this is an ingenious setup you have deviced! I tried it myself yesterday and I have a few quick questions if you don´t mind helping me with them.

1. The tip of the condom of the vac device, "deattaches" itself from the glans once I start hanging. This causes pressure on the tip of the glans and it is painful. How do you prevent this? If my explanation is not clear, I can send you a picture.
2. Do you attach the compression hanger ONLY on the wrapped up sleeve or also a bit on the "unsleeved" part of the shaft? In order to prevent the compression hanger from just pushing the vac hanger off the penis?

Thank you!

Hey duude,

sorry for the late response I kinda forget the threads I started.

1. So in order to prevent the tip from slipping I pump about three times or as much is needed so the glans is nice and tight. It's a lot easier when the glans is already pump for example after using bathmate the same day. When I first tried my hanging system I didn't put any pressure on the glans but that isn't as good as getting the glans nicely filled up in the cap. Depending what size your glans is you can experiment around with different cap sizes. I myself am using the medium size cap for hanging. If your glans is "unpumped" and in it's normal stage and you feel that you need more grip inside the cap then after you increase the pressure inside the cap let the glans fill up the cap for around 15 minutes or more that should help against slipping. (with the chinese caps there is no way of releasing the pressure other than taking the whole thing off but that's fine just use as much pressure as you need)

2. To be honest I've never tried attaching the compression hanger under behind the sleeve or on boths part the same time. I just attach it over the wrapped shaft as close as possible to the glans.

I found out that when I referse the compression hanger my penis hangs straight down it also feels a bit lighter somehow. Otherwhise when attaching the compression hanger normaly it causes the front part of the penis to curve and that hurts.

I have a second picture in my photo album that may help. (https://www.pegym.com/forums/members/alex1988-albums-anti-blister-hanging-system-picture103944-img-2510.jpg)
I can make additional pics if needed.

[Alex1988]

WOW, I cannot wrap me brain around this but if it works for you and you are having success, well, there is more than one way to skin a cat.

I look forward to your progress with this set up.

I will follow this thread with interest....best of luck and hopefully you have great success.

This is what the forums are for, sharing ideas and helping each other out!

Hi BigO,

I can't say how successful this system is in terms of gains but all I 100% know is that I've used it for 6 months now and I didn't get a single blister ever again! And I can even go for a bathmate 15-20 min session and right after I can hang 30-45 min with this thing. This was impossible for me when I was vac hanging the normal way, it would result in blisters.

I hope that guys can try out my idea and give feedback to make it even better.

And you're absolute right there's more than one way of getting things done.

[Alex1988]

I’m confused by your setup. It looks like the weight is attached to the compression hanger, not the vac hanger, correct?

It looks like you are using the vac hanger as padding for the compression hanger.
Why not just clamp over the sleeve of the vac hanger and not even attach the top?

Hey deeze6,

yes you are correct the weight is held by the compression hanger.

I must attach the vac top piece otherwise my foreskin would slip over my glans with the comprression hanger connected. That's the essential idea of this build. Both devices working together to prevent their negative effects.

[BigO]

Ok, so after looking at the setup I am not sure why you are wearing the vac hanger, its not holding the weight at the vacuum attachment.

Why not just wrap and hang?

I see this set up being problematic once you go to heavy hanging. The vac hanger will draw lymph fluid to your glans and this may make using a clamp style hanger painful.

Is their a specific goal you have to use the vac hanger in this manner?

[Alex1988]

Ok, so after looking at the setup I am not sure why you are wearing the vac hanger, its not holding the weight at the vacuum attachment.

Why not just wrap and hang?

I see this set up being problematic once you go to heavy hanging. The vac hanger will draw lymph fluid to your glans and this may make using a clamp style hanger painful.

Is their a specific goal you have to use the vac hanger in this manner?

My foreskin doesn't allow me to just hang with the compression hanger alone. That's why I came up with this setup. And hanging with only the vac hanger results in blisters.